I'm currently trying leaf props on some other genera. I agree that you want to cut away a lot of the paper-thin part of the leaf because it will either dry up or rot anyway and a point on the bottom makes it easier to stick into the medium. With Eucomis my best results used Dip n Grow solution at 1:10 dilution, but Clonex gel has also worked. In my latest experiments with other plants I'll try side-by-side comparisons of both Clonex and Dip n Grow, and will also test different media. I currently use mostly promix but have also used pure perlite. I'm going to try more exotic things like hydrogel beads, but I suspect that might be too wet. I'll report any positive results I get. In general, two considerations are worth attention, and both arise because that cutting is fighting to stay hydrated. First, use the best leaf you can, and make sure it is well-hydrated before harvesting. Second, try to keep it in a humid environment and/or mist in the morning, and keep it in a shady, protected spot. Mine stay in the shadiest part of the greenhouse and are misted frequently. Even in the best case, results can be spotty and frustrating. Just keep at it... Bob Zone 7 _______________________________________________ pbs mailing list pbs@lists.pacificbulbsociety.net http://lists.pacificbulbsociety.net/cgi-bin/… Unsubscribe: <mailto:pbs-unsubscribe@lists.pacificbulbsociety.net>